Tri-Tronics problem

A general forum for the discussion of hunting with beagles, guns, clothing and other equipment and just talking dawgs! (Tall tales on hunting allowed, but remember, first liar doesn't stand a chance)

Moderators: Pike Ridge Beagles, Aaron Bartlett

Post Reply
miner49er
Posts: 247
Joined: Mon Mar 08, 2004 10:55 am
Location: Tollesboro, Ky

Tri-Tronics problem

Post by miner49er »

I have had a Trashbreaker for 2 years and no problems, went out Friday evening and my red collar showed that it was charged and would come on but wouldnt respond to the transmitter. Anyone had this happen? Is there something I can do to reset this or do I need to contact Tri-tronics to get this issue solved?
You gotta stand for something or you'll fall for anything
Top
bluecollar beagler
Posts: 563
Joined: Sun Feb 22, 2009 7:50 pm
Location: waterloo,ohio

Re: Tri-Tronics problem

Post by bluecollar beagler »

if my memory serves me right on the g2 and g3 models you could hold them an arms length apart and hold the button down and reprogram it to the transmitter again... might be worth trying if its possible on the trashbreaker model you have.
Top
joshy4444
Posts: 14
Joined: Sun Dec 30, 2012 10:38 pm

Re: Tri-Tronics problem

Post by joshy4444 »

Try what blue collar said and reprogram it to the transmitter. I just had this happen to me and it would not reprogram, called tri-tronics have the serial number of the collar handy and they can tell you over the phone if it is under warranty. If it is under warranty they will send you a new one no questions asked, if not for 75.00 you will get a brand new one. The problem in the board inside the collar.
Top
Post Reply

Return to “Just Talkin' Dawgs”